Open Research

Permanent link for this community

https://hdl.handle.net/10292/549

About

Tuwhera Open Access Research Outputs provides free access to full texts of scholarly works from AUT's Schools, Research Institutes and Centres.

AUT's research is built on a foundation of innovation and excellence, with the aim that its discoveries and applications are shared in ways that enhance wellbeing and prosperity.

Adding your outputs

AUT staff research outputs are added to this collection via Research Elements. All items submitted to this collection are checked to ensure material does not breach publisher copyright and is suitable for archiving prior to being made open access.

Find out more about making your work open access

For help with Research Elements contact the Research and Innovation Office.

Browse

Browsing Open Research by Subject "0204 Condensed Matter Physics"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    A Highly Stretchable Strain-based Sensing Sheet for the Integrated Structural Health Monitoring
    (IOP Publishing, 2024-06-28) Zhang;, Hui; Beskhyroun, Sherif
    In this study, a flexible strain sensing system that can be applied to full-scale reinforced concrete frame structures is presented. In order to fulfil the criteria for strain detection that are posed by various structural components, the flexible strain gauge is offered in two distinct configurations: one full bridge and one double half bridge. A strain configuration selector is built on the basis of this information. The selector is designed to enable the system to flexibly switch strain modes for measuring axial or bending strain without adjusting the installation location of strain sensors. The first section of this study focuses mostly on elaborating on the methodology behind the development of a flexible strain system. This method was primarily designed with the aim of detecting the abnormalities in the strain field that are brought on by structural damage in order to accomplish the goal of local detection. The creation of a strain configuration selector also enables the conversion between two different strain measures whenever it is necessary without requiring the sensor installation to be moved to a new position, which helps to significantly reduce the amount of cost associated with sensor deployment. The performance of the flexible strain sensing system as well as its sensitivity were evaluated by doing the cyclic load testing on a full-scale RC frame. Both half-bridge and full-bridge strain gauges are installed in the critical components, such as beams and columns. In addition, 14 linear variable displacement transducers (LVDTS) were placed on the RC frame in order to monitor variations in displacement and deformation. The findings of the experiments indicate that the flexible strain sensor exhibits a high degree of sensitivity, and it is therefore suitable for integration into a structural health monitoring (SHM) system for the purpose of tracing the strain caused by localised structural damage. Additionally, it is able to monitor the strain trend on the complete scale of the frame model. In future work, the flexible strain system will be modified and enhanced by using wireless technology for data transmission in order to build a wirelessly integrated structural health monitoring (SHM) system.
  • Thumbnail Image
    Item
    Additive Manufacturing Materials for Structural Optimisation and Cooling Enhancement of Superconducting Motors in Cryo-Electric Aircraft
    (IOP Publishing, 2023-08-18) Lumsden, Grant; Ludbrook, Bart; Rogers Rehn, Nic; Solis Fernandez, Fernando; Davies, Mike; Chamritski, Vadim; Singamneni, Sarat; Badcock, Rodney Alan
    Superconducting electric motors offer the potential for low weight and high power in applications such as electric aircraft and high speed marine transport. Combined with renewably-sourced cryogenic fuels and advanced fuel cells they offer a path to zero-carbon mass transport. The proposed architectures of these extreme machines, operating at temperatures around 20 K–50 K and employing very high alternating magnetic fields, require materials for the stator that are not electrically conducting and at the same time have good cryogenic structural performance. Additively manufactured (AM) materials can play a key role in these designs, and a collaboration between the Robinson Research Institute and Auckland University of Technology is studying the performance of a range of composite polymers in superconducting machine applications. There are significant challenges to be met, including understanding the effect of the build process on material properties at low temperatures, and also the effect of formulation changes on thermal properties. AM metals can be employed in the rotor components, where the magnetic field fluctuations are very small for our synchronous designs. In this usage case, we can achieve dramatic reductions in the weight of the rotor assembly by minimising the number of joints and facilitating the design of multi-functional components in our helium cooled, vacuum cryostat architecture. Novel design solutions have been developed for several key components in our prototype machines and these are discussed, along with cryogenic testing results for selected AM polymers and composites.
  • Thumbnail Image
    Item
    Anomaly Detection in Text Data Sets Using Character-Level Representation
    (Institute of Physics (IoP), 2021-04-28) Mohaghegh, Mahsa; Abdurakhmanov, Amantay
    This paper proposes a character-level representation of unsupervised text data sets for anomaly detection problems. An empirical examination of the character-level text representation was conducted to demonstrate the ability to separate outlying and normal records using an ensemble of multiple classic numerical anomaly classifiers. Experimental results obtained on two different data sets confirmed the applicability of the developed unsupervised model to detect outlying instances in various real-world scenarios, providing the opportunity to quickly assess a large amount of textual data in terms of information consistency and conformity without knowledge of the data content itself.
  • Thumbnail Image
    Item
    Automated Biometric Identification using Dorsal Hand Images and Convolutional Neural Networks
    (Institute of Physics (IoP), 2021-04-01) Mohaghegh, Mahsa; Ash, Payne
    The identification of perpetrators, present in Child Sexual Abuse Imagery (CSAI), is a significant challenge due to the use of anonymisation techniques that mask their identities. Consequently, researchers have investigated the use of uncommon biometric identifiers such as knuckle patterns, palmprints and the dorsal side of the hand. This research proposes a Convolutional Neural Network (CNN) based, fully automated approach to biometric identification using dorsal hand images. The identification performance of three different CNN architectures, AlexNet, ResNet50 and ResNet152, is experimentally determined against two similar datasets, the 11k Hands and IITD dorsal hand databases. A transfer learning approach is used and the final output layers of the CNNs are modified to match the number of classes present in the datasets. The results showed that ResNet CNNs achieved identification accuracies greater than 99.9% on both datasets, whereas the AlexNet CNN achieved between 80.1% and 93.7%. These results demonstrate that it is feasible to use deep, off-the-shelf CNNs, such as ResNets, for automated biometric identification using dorsal hand images. This highlights the potential of using dorsal hand images to identify perpetrators of child sexual abuse from CSAI.

Copyright information

Items in these collections are protected by the Copyright Act 1994 (New Zealand). These works may be consulted by you, provided you comply with the provisions of the Act and the following conditions of use:
  • Any use you make of these works must be for research or private study purposes only, and you may not make them available to any other person.
  • Authors control the copyright of their works. You will recognise the author’s right to be identified as the author of the work, and due acknowledgement will be made to the author where appropriate.
  • You will obtain the author’s permission before publishing any material from the work.